Silicone Doll Wash & Care Kit
A coordinated cleaning set for silicone dolls, combining pumped water rinsing, a rotating wash head, a separately powered UV lamp and reusable absorbent rods. Use only on compatible silicone dolls and follow the doll manufacturer’s care instructions.
What is included
1 washer, 1 wash head, 1 water intake hose, 1 UV lamp, 2 absorbent rods, washer charging cable, storage box and manufacturer instructions. Detergent and a water container are not included. A separate Type-C cable and 5 V USB power supply are required for the UV lamp.
Product information
Rechargeable washer: 1200 mAh, 3.7 V. Charging input: USB 5 V / 500 mA, approximately 3 hours. The UV lamp is powered separately via Type-C / 5 V USB. Compatibility stated in the supplied instructions: silicone dolls; suitability for TPE is not confirmed.
Use and care
Fit the wash head and intake hose. Prepare at least 1.5 L of clean drinking water, no hotter than 40°C. Hold the power button for 2 seconds. Press the mode button once for pumped rinsing, twice for the rotating cycle (approximately 65 seconds), and again to stop. Drain excess water. If using the UV lamp, fully enclose its glass section before connecting power and follow the supplied manufacturer instructions for exposure time; disconnect before removal. Use the absorbent rods to remove remaining moisture, then let them air-dry. Remove the hose, wipe the washer dry and store safely.
Important safety information
Never use this equipment on a person. UV light must not reach eyes, skin, animals or plants. Place the entire glass section inside the doll before switching on, and disconnect power before removing it. Never use a damaged glass lamp. Do not immerse the washer body, boil it or use water above 40°C. Stop using it if damaged or malfunctioning. The kit is supplied non-sterile; no sterilisation rate is guaranteed.
Operation videos
Demonstration only: unit colour may differ
Actual product photos
Source: supplied manufacturer instructions and product photographs. Packaging print remains as supplied.




















































































Reviews
There are no reviews yet.